Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-673003.png)
5. DISCONNECT TRANSMISSION CONTROL CABLE ASSY
a. Remove the cable end from the rod of the floor shift assembly.
b. Using a screwdriver, disconnect the control cable from the shift lever plate.
HINT: Tape up the screwdriver tip before use.
6. DISCONNECT FLOOR SHIFT PARKING LOCK CABLE ASSY
a. Remove the cable end from the lever pin of the floor shift assembly.
b. Using a screwdriver, disconnect the parking lock cable from the floor shift assembly.
HINT: Tape up the screwdriver tip before use.
7. REMOVE FLOOR SHIFT ASSY
a. Disconnect the 2 connectors.
