Corolla L4-2.4L (2AZ-FE) (2010)
![background image](/toyota/corolla/l4-2.4l_(2az-fe)/Page-2465001.png)
Sunroof / Moonroof Switch: Testing and Inspection
SLIDING ROOF / CONVERTIBLE: SLIDING ROOF SWITCH ASSEMBLY: INSPECTION
1. INSPECT MAP LIGHT ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) If the result is not as specified, replace the map light assembly.
(c) Measure the voltage using diode test mode.
Standard Voltage:
NOTICE:
This procedure is for using a digital tester which has diode test mode such as a TOYOTA electrical tester. If a tester which does not