Corolla L4-2.4L (2AZ-FE) (2010)
Brake Pedal Assy: Overhaul
Disassembly
BRAKE SYSTEM (OTHER): BRAKE PEDAL: DISASSEMBLY
1. REMOVE BRAKE PEDAL SUB-ASSEMBLY
(a) Remove the bolt, nut and brake pedal sub-assembly from the brake pedal support sub-assembly.
2. REMOVE BRAKE PEDAL BUSHING
(a) Remove the 2 brake pedal bushings from the brake pedal sub-assembly.
3. REMOVE BRAKE PEDAL PAD
(a) Remove the brake pedal pad.
Reassembly
BRAKE SYSTEM (OTHER): BRAKE PEDAL: REASSEMBLY
1. INSTALL BRAKE PEDAL PAD
(a) Install the brake pedal pad.
2. INSTALL BRAKE PEDAL BUSHING
(a) Apply lithium soap base glycol grease to 2 new brake pedal bushings, and install them to the brake pedal sub-assembly.
3. INSTALL BRAKE PEDAL SUB-ASSEMBLY
(a) Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the bolt and nut as shown in the illustration.
Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)