Corolla L4-2.4L (2AZ-FE) (2010)
(c) Tighten the bolt and nut to install the V-ribbed belt tensioner.
Torque : 60 Nm (612 kgf-cm, 44 ft-lbf)
NOTICE:
*
When replacing the V-ribbed belt tensioner with a new one, do not pull out the pin.
*
The pin will be removed in a later step.
21. INSTALL CRANKSHAFT PULLEY
(a) Using SST, secure the pulley in place and tighten the bolt.
SST : 09213-54015
91651-60855
SST : 09330-00021
Torque : 180 Nm (1835 kgf-cm, 133 ft-lbf)
(b) Turn the crankshaft counterclockwise, then disconnect the hook from the pin.
(c) Turn the crankshaft clockwise, then check that the plunger is extended.