Corolla L4-2.4L (2AZ-FE) (2010)
![background image](/toyota/corolla/l4-2.4l_(2az-fe)/Page-999004.png)
INSPECTION PROCEDURE
NOTICE:
*
Turn the ignition switch off before measuring the resistance of the main CAN bus wires and the CAN Bus branch wire.
*
After the ignition switch is turned off, check that the key reminder warning system and light reminder warning system are not in
operation.
*
Before measuring the resistance, leave the vehicle as is for at least 1 minute and do not operate the ignition switch, any other