Corolla L4-2.4L (2AZ-FE) (2010)
![background image](/toyota/corolla/l4-2.4l_(2az-fe)/Page-999041.png)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE INSTRUMENT PANEL JUNCTION BLOCK (MAIN BODY ECU)
Skid Control ECU Communication Stop Mode
NETWORKING: CAN COMMUNICATION SYSTEM: Skid Control ECU Communication Stop Mode
- Skid Control ECU Communication Stop Mode
DESCRIPTION
WIRING DIAGRAM