Corolla L4-2.4L (2AZ-FE) (2010)
![background image](/toyota/corolla/l4-2.4l_(2az-fe)/Page-999086.png)
(1) Measure the resistance according to the value(s) in the table below.
NOTICE:
The resistance must be measured after the CAN No. 1 junction connector is disconnected.
Standard Resistance:
(b) Except TMC made:
(1) Measure the resistance according to the value(s) in the table below.
NOTICE:
The resistance must be measured after the CAN No. 1 junction connector is disconnected.
Standard Resistance:
NG -- CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 1 JUNCTION CONNECTOR - MAIN BODY ECU)
OK -- Continue to next step.
10. CHECK FOR SHORT TO GND IN CAN BUS WIRE (AIR CONDITIONING AMPLIFIER BRANCH WIRE)
(a) TMC made: