Corolla L4-2.4L (2AZ-FE) (2010)
Throttle Body: Service and Repair
Installation
2AZ-FE ENGINE CONTROL: THROTTLE BODY: INSTALLATION
1. INSTALL THROTTLE BODY ASSEMBLY
(a) Install a new gasket onto the intake manifold.
(b) Install the throttle body assembly with the 4 bolts.
Torque : 30 Nm (306 kgf-cm, 22 ft-lbf)
(c) Connect the throttle body hose.
(d) Connect the throttle body connector.
(e) Connect the 2 water by-pass hoses.