Corolla L4-2.4L (2AZ-FE) (2010)
Keyless Entry Module: Service and Repair
Removal
DOOR LOCK: DOOR CONTROL RECEIVER: REMOVAL
1. REMOVE REAR DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
3. REMOVE REAR SEAT CUSHION ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
4. REMOVE REAR SEAT SIDE GARNISH RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
5. REMOVE ROOF SIDE INNER GARNISH BOARD RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
6. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
7. REMOVE DOOR CONTROL RECEIVER
(a) Disconnect the connector.
(b) Remove the bolt and the door control receiver.