Corolla L4-2.4L (2AZ-FE) (2010)
/Page-216004.png)
4. REMOVE FRONT FENDER LINER See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release Cable/Service and
Repair/Removal
5. REMOVE FRONT SPEED SENSOR (for TMMC, NUMMI Made)
(a) Disconnect the front speed sensor connector.
(b) Remove the front speed sensor wire harness clamp from the body.
(c) Remove the bolt and the No. 2 sensor clamp from the body.
(d) Remove the bolt and separate the brake flexible hose.
(e) Remove the No. 1 sensor clamp from the shock absorber.