Corolla L4-2.4L (2AZ-FE) (2010)
![background image](/toyota/corolla/l4-2.4l_(2az-fe)/Page-523001.png)
Washer Fluid Level Switch: Testing and Inspection
WIPER / WASHER: WASHER LEVEL WARNING SWITCH: INSPECTION
1. INSPECT LEVEL WARNING SWITCH ASSEMBLY
(a) Remove the washer jar.
(b) Disconnect the level warning switch connector.
HINT
The check should be performed with the level warning switch assembly installed to the washer jar.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(d) If the result is not as specified, replace the level warning switch assembly.