Corolla L4-2.4L (2AZ-FE) (2010)
/Page-2833001.png)
Rear Door Window Regulator: Testing and Inspection
Inspection
WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR (for Rear Door): INSPECTION
1. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
(a) Apply battery voltage to connector terminals 1 and 2.
NOTICE:
Do not apply battery voltage to any terminals except terminals 1 and 2.
(b) Check that the motor gear rotates smoothly as follows.
OK:
(c) If the result is not specified, replace the rear power window regulator motor assembly LH.
2. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH
(a) Apply battery voltage to connector terminals 1 and 2.