toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Air Flow Meter/Sensor > < Equipment Hookup & Adjustment Procedures|Page 1277
Page 1
background image

Air/Fuel Mixture: Adjustments

Fig. 20 Concealment plug removal (typical)

NOTE:  Under normal conditions the idle fuel mixture should never have to be adjusted. However, if an idle or driveability problem exists and no other
reason can be found for the condition, the idle mixture may have to be adjusted.

1.

Remove carburetor from engine.

2.

Remove concealment plug,Fig. 20.

3.

Adjust the basic setting at 2.5 turns out for Canadian models and 3 turns out for USA models.

4.

Reinstall carburetor, check driveability and emissions to ensure accuracy of adjustments.

Air Flow Meter/Sensor > < Equipment Hookup & Adjustment Procedures|Page 1277