Corolla LE Sedan L4-1.8L (1ZZ-FE) (1999)
/Page-491005.png)
HINT: If necessary, remove the pulley with SST.
SST 09950-50011 (09951-05010, 09952-05010, 09953-05020, 0995005020)
11. DISCONNECT CRANKSHAFT POSITION SENSOR FROM TIMING CHAIN COVER
Remove the 2 bolts and crankshaft position sensor.
12. REMOVE DRIVE BELT TENSIONER
Remove the bolt, nut and drive belt tensioner.
13. REMOVE RH ENGINE MOUNTING BRACKET
Remove the 3 bolts and mounting bracket.
14. REMOVE CHAIN TENSIONER
Remove the 2 nuts and chain tensioner.
15. REMOVE WATER PUMP
16. REMOVE TIMING CHAIN COVER
a. Remove the 11 bolts and nuts.
b. Using a torx wrench socket (E8), remove the stud bolt.
c. Remove the timing chain cover by prying the portions between the cylinder head and cylinder block with a screw driver.
NOTICE: Be careful not to damage the contact surfaces of the timing chain cover, cylinder head and cylinder block.
17. REMOVE CRANK ANGLE SENSOR PLATE
18. REMOVE CHAIN TENSIONER SLIPPER
