Corolla LE Sedan L4-1.8L (1ZZ-FE) (1999)
Blower Motor Resistor: Service and Repair
REMOVAL
1. REMOVE THESE PARTS:
a.
Front Door Scuff Plate RH
b.
Cowl Side Trim RH
c.
Lower Panel
2. REMOVE BLOWER RESISTOR
a.
Disconnect the connector.
b.
Remove the 2 screws and blower resistor.
INSTALLATION
1. INSTALL BLOWER RESISTOR
a.
Install the blower resistor with the 2 screws.
b.
Connect the connector.
2. INSTALL THESE PARTS:
a.
Lower Panel
b.
Cowl Side Trim RH
c.
Front Door Scuff Plate RH