Corolla LE Sedan L4-1.8L (1ZZ-FE) (1999)
b. Pass the heater control cables as shown in the image.
c. Install the 2 set screws.
2. CONNECT HEATER CONTROL CABLES
a. Set Air inlet control lever at "RECIRC" position
b. Set Temperature control dial at "MAX. COOL" position
c. Set Mode control dial at "DEF" position
d. Adjust air inlet control cable.
Set air inlet damper control lever to "RECIRC" position and connect the inner cable to lever pin and clamp the outer cable.
HINT: Lock the clamp while lightly pushing the outer cable to the direction shown by arrow in the illustration.