Corolla LE Sedan L4-1.8L (1ZZ-FE) (1999)
Generator: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE REAR END COVER
a. Remove the nut and terminal insulator.
b. Remove the bolt, 3 nuts, plate terminal and end cover.
2. REMOVE BRUSH HOLDER AND VOLTAGE REGULATOR
a. Remove the brush holder cover from the brush holder.
b. Remove the 5 screws, brush holder and voltage regulator.
c. Remove the seal plate from the rectifier end frame.
3. REMOVE RECTIFIER HOLDER
a. Remove the 4 screws and rectifier holder.
b. Remove the 4 rubber insulators.
4. REMOVE PULLEY