Corolla LE Sedan L4-1.8L (1ZZ-FE) (1999)
/Page-1437004.png)
Maximum difference: 3.0 mm (0.118 inch)
c. Adjust the No. 2 lower suspension arm length by turning the adjusting tube.
Arm length: 502.0 ± 1.5 mm (19.764 ± 0.059 inch)
d. Temporarily tighten the 2 lock nuts.
HINT: After adjusting the rear wheel alignment, torque the lock nuts.
Torque: 56 Nm (570 kgf-cm, 41 ft. lbs.)
INSTALLATION
Installation Is In the reverse order of removal.
HINT: After installation, check the rear wheel alignment.
