Corolla LE Sedan L4-1.8L (1ZZ-FE) (1999)
c. Remove the bolt and washer, and disconnect the No. 1 lower suspension arm from the axle carrier.
d. Lower the suspension member, remove the bolt, washer and No. 1 lower suspension arm.
DISASSEMBLY
DISASSEMBLE NO. 2 LOWER SUSPENSION ARM
a. Loosen the 2 lock nuts.
b. Turn the adjusting tube and disassemble the No. 2 lower suspension arm.
c. Remove the 2 lock nuts.
REASSEMBLY
ASSEMBLE NO. 2 LOWER SUSPENSION ARM
a. Install the 2 lock nuts.
b. Turn the adjusting tube and assemble the No. 2 lower suspension arm.
HINT: When assembling the No. 2 lower suspension arm, try to make sure that the lengths of A and B shown in the illustration are the same.