toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Clutch, M/T > < Service Manual|Page 4900
Page 4
background image

Bolt length:

A bolt: 12 mm (0.47 inch)
B bolt: 20 mm (0.79 inch)

Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.) 

14. INSTALL 2 MAGNETS IN OIL PAN
15. INSTALL OIL PAN AND GASKET

a. Install a new gasket to the oil pan and install them to the transaxle.
b. Install the 18 bolts.

Torque: 5.3 Nm (55 kgf-cm, 48 inch lbs.) 

16. INSTALL DRAIN PLUG

Torque: 17 Nm (175 kgf-cm, 13 ft. lbs.) 

17. INSTALL LH ENGINE UNDER COVER
18. FILL ATF AND CHECK FLUID LEVEL Refer to Automatic Transmission/Transaxle; Testing and Inspection; Procedures Troubleshooting.

Clutch, M/T > < Service Manual|Page 4900