Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
10. Remove crankshaft pulley.
a. Using SST 09213-70010, 09330-00021 and 2 nuts (width: 10 mm (0.25 inch), remove the pulley bolt.
b. Remove the crankshaft pulley.
HINT: If necessary, remove the pulley with SST 09950-50010 (09951-05010, 09952-05010, 09953-05020, 09954-05020).
11. Disconnect crankshaft position sensor from timing chain cover.
Remove the 2 bolts and crankshaft position sensor.
12. Remove drive belt tensioner.
Remove the bolt, nut and drive belt tensioner.
13. Remove RH engine mounting bracket.
Remove the 3 bolts and mounting bracket.
14. Remove chain tensioner.
Remove the 2 bolts and chain tensioner.
15. Remove water pump.
16. Remove timing chain cover.