toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Control Assembly, HVAC|Removal and Installation|Page 5407 > < Control Assembly, HVAC|Removal and Installation|Page 5405
Page 3
background image

c. Adjust air mix control cable.

1. Set air mix damper control lever to "COOL" position.
2. Install inner cable to lever pin and clamp the outer cable.

HINT:  Lock the clamp while lightly pulling the outer cable to the direction shown by arrow in the illustration.

d. Adjust mode control cable.

1. Set mode control lever to "DEF" position
2. Install inner cable to lever pin and clamp the outer cable.

HINT:  Lock the clamp while lightly pushing the outer cable to the direction shown by arrow in the illustration.

Control Assembly, HVAC|Removal and Installation|Page 5407 > < Control Assembly, HVAC|Removal and Installation|Page 5405