Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
Seat Belt Reminder Lamp: Testing and Inspection
INSPECT SEAT BELT WARNING LIGHT
a. Disconnect the connector from the retractor switch and ground terminal on the wire harness side connector.
b. Turn the ignition switch ON and check that the warning light lights up.
If the warning light does not light up, inspect the bulb or wire harness.
INSPECT SEAT BELT WARNING SYSTEM (INSPECT INTEGRATION RELAY OPERATION)
a. Connect the positive (+) lead from the battery to terminals 3 and 9.
b. Connect the terminal 7 to terminal 9 through the 3.4 W test bulb.
c. Connect the negative (-) lead from the battery to terminal 7.
d. Check that the bulb lights and the buzzer sounds for 4 - 8 seconds.
e. Return to step (a) and operate the buzzer sound again.
f.
Connect the negative (-) lead from the battery to terminal 3.
g. Check that the buzzer stops sounding.
HINT: Check the buzzer within a period of 4 to 8 seconds.
If operation is not as specified, replace the relay.
INSPECT SEAT BELT WARNING SYSTEM (INSPECT INTEGRATION RELAY CIRCUIT)
