toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Pressure Specification|Page 1301 > < Pressure Specification|Page 1299
Page 1
background image

Fuel Pressure: Testing and Inspection

Fuel Pressure Inspection

CHECK FUEL PRESSURE
(a) Check the battery positive voltage is above 12 V.
(b) Disconnect the negative (-) terminal cable from the battery.

(c) Purchase the new fuel tube and take out the fuel tube connector from its pipe. 

Part No. 23901-22010

(d) Remove the fuel pipe clamp.

(e) Disconnect the fuel tube (fuel tube connector) from the fuel pipe.

CAUTION:
-

Perform disconnecting operations of the fuel tube connector (quick type) after observing the precautions.

-

As there is retained pressure in the fuel pipe line, prevent if from splashing inside the engine comportment.

Pressure Specification|Page 1301 > < Pressure Specification|Page 1299