Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
-
Calculate the thickness of a new lifter so the valve clearance comes within the specified value.
T = Thickness of used lifter
A = Measured valve clearance
N = Thickness of new lifter
Intake: N = T + (A - 0.20 mm (0.008 inch)
Exhaust: N = T + (A - 0.30 mm (0.012 inch)
-
Select a new lifter from the following charts with a thickness as close as possible to the calculated values.
Lifters are available in 35 sizes in increments of 0.020 mm (0.0008 inches), from 5.060 mm (0.1992 in) to 5.740 mm (0.2260 in).
