toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Side Airbag Electrical Connectors|Page 5595 > < Side Air Bag|Page 5592
Page 1
background image

Side Air Bag: Service and Repair
Side Airbag Electrical Connectors

DISCONNECTION OF SIDE AIRBAG CONNECTORS

a. Place a finger on the slider.
b. Slide the slider to release lock.
c. Disconnect the connector.

CONNECTION 0F SIDE AIRBAG CONNECTORS

a. Align the male connector and the female connector in the same direction as shown in the illustration, fit in them without rubbing.
b. Make sure to insert until the connectors are locked. After fitting in, pull them lightly to check that they are locked. (When locked, make sure that

the outer returns to its original position and sound at the time of fitting in can be heard.)

HINT:

^

As the slider slides, do not touch it.

^

Be careful not to deform the release board. If the release board is deformed, replace it with a new one.

Side Airbag Electrical Connectors|Page 5595 > < Side Air Bag|Page 5592