Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
1. Secure PS gear assembly in vise.
Using Special Service Tool (SST) 09612-00012 or equivalent, secure the gear assembly in a vise.
2. Remove 2 turn pressure tubes.
a. Using SST 09633-00020, remove the tube.
b. Remove the 2 O-rings from the tube.
3. Remove RH and LH tie rod ends and lock nuts.
Place matchmarks on the tie rod end and rack end.
4. Remove RH and LH clips, rack boots and clamps.
Using pliers, loosen the clamp.
NOTICE:
-
Be careful not to damage the boot.
-
Mark the RH and LH boots.
