Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
1. Install lower insulator.
2. Install spring bumper to piston rod.
3. Install coil spring.
a. Using SST 09727-30021, compress the coil spring.
NOTICE: Do not use an impact wrench. It will damage the SST.
b. Install the coil spring to the shock absorber.
HINT: Fit the lower end of the coil spring into the gap of the lower seat.
4. Install suspension support.
a. Align the suspension support with the shock absorber lower bracket, as shown in the illustration.
b. Install the collar to the piston rod.
c. Temporarily install a new nut.
d. Remove the SST 09727-30021.
HINT: After removing SST, recheck the direction of the suspension support
