Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
7. INSTALL SHIFT LOCK UNIT
Install the shift control unit and 2 screws.
NOTICE: Install the grooved pin into the groove of the shift lock unit as shown in the illustration.
8. INSTALL CAP, BULB AND INDICATOR LIGHT WIRE
9. ASSEMBLE INDICATOR HOUSING
Install these parts to the position indicator upper housing.
-
Position indicator plate
-
Position indicator slide plate
-
Spring and shift lock release button
-
Shift lock release button cap
-
Position indicator lens
-
Position indicator lower housing
NOTICE: Do not make indicator housing dirty with MP grease.
10. INSTALL INDICATOR HOUSING
Install 2 screws and an indicator housing.
11. CONNECT INDICATOR CAP, BULB AND LIGHT WIRE
12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
a. Install these parts:
HINT: Apply MP grease to shift lever knob button.
-
0/D main switch
-
Spring
-
Shift lever button
-
Shift lever knob cover
b. Install the shift lever sub-assembly and 2 screws.
HINT: Coat the threads of the screws with sealant.
Sealant: Part No. 08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent
NOTICE: Make sure not to catch O/D main switch wire harness.
c. Install the O/D main switch wire harness securely to hung on the hook of the shift lever sub-assembly.
13. INSTALL O/D MAIN SWITCH TERMINAL