Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
/Page-882005.png)
a. Using a chisel and hammer, unstake the washer.
NOTICE: Avoid any impact on the steering rack.
b. Using SST, remove the rack end and claw washer.
SST 09922-10010
NOTICE: Use SST 09922-10010 in the direction shown in the illustration.
HINT: Mark the RH and LH rack ends.
c. Employ the same manner described to the other side.
6. REMOVE RACK GUIDE SPRING CAP LOCK NUT
Using SST, remove the rack guide spring cap lock nut.
SST 09922-10010
NOTICE: Use SST 09922-10010 in the direction shown in the illustration.
7. REMOVE RACK GUIDE SPRING CAP, RACK GUIDE SPRING, CONICAL SPRING WASHER, RACK GUIDE SUBASSEMBLY
a. Using a hexagon wrench (19 mm), remove the rack guide spring cap.
b. Remove the rack guide spring, conical spring washer, rack guide subassembly.
8. REMOVE RACK HOUSING CAP
