toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Speed Sensor, Front|Page 3118 > < Wheel Speed Sensor|Diagrams
Page 1
background image

Wheel Speed Sensor: Service and Repair
Speed Sensor, Front

REMOVAL

1. DISCONNECT SPEED SENSOR CONNECTOR

a. Remove the fender liner.
b. Disconnect the speed sensor connector.

2. REMOVE SPEED SENSOR

a. Remove the 3 clamp bolts holding the sensor harness to the body and shock absorber.

Torque: 5.0 Nm (51 kgf-cm,44 inch lbs.)

b. Remove the speed sensor from the steering knuckle.

Torque: 8.0 Nm (82 kgf-cm,71 inch lbs.)

INSTALLATION

Installation is in the reverse order of removal.

HINT:  After installation, check speed sensor signal. 

Speed Sensor, Front|Page 3118 > < Wheel Speed Sensor|Diagrams