Removing Evaporator Case in a Corolla S Sedan L4-1794cc 18L DOHC MFI (2001)
2. Push down SST and release the clamp lock.
NOTE: Be careful not to deform the tubes, when pushing SST.
3. Pull SST slightly and push the release lever, then remove piping clamp with SST.
4. Remove the piping clamp from SST
c. Disconnect the both tubes
NOTE: Cap the open fittings immediately to keep moisture or dirt out of the system.
5. REMOVE TUBE GROMMET AND DRAIN HOSE GROMMET
6. REMOVE LOWER FINISH PANEL
7. REMOVE A/C AMPLIFIER
a. Disconnect the connector.
b. Remove the 2 nuts and amplifier.
8. REMOVE COOLING UNIT
a. Disconnect the connectors.
b. Remove the 3 screw, nut and cooling unit.
INSTALLATION
