toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Compression Check > < Electrode Gap Specification|Page 691
Page 3
background image

f.

Clean the spark plugs.
If the electrode has traces of wet carbon, allow it to dry and then clean with a spark plug cleaner.

Air pressure: Below 588 kPa (6 kg/sq.cm, 85 psi)

Duration: 20 seconds or less

HINT:  If there are traces of oil, remove it with gasoline before using the spark plug cleaner.

g. Using a 16 mm plug wrench, install the spark plugs.

Torque: 18 N.m (180 kg.cm, 13 ft.lb)

h. Reinstall the ignition coils.

Compression Check > < Electrode Gap Specification|Page 691