toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Pressure Specification|Page 2352 > < Pressure Specification|Page 2350
Page 2
background image

a. Check the battery positive voltage is above 12 V.
b. Disconnect the negative (-) terminal cable from the battery.
c. Purchase the new fuel tube and take out the fuel tube connector from its pipe.

Part No. 23901-22010

d. Remove the fuel pipe clamp.

e. Disconnect the fuel tube (fuel tube connector) from the fuel pipe.

CAUTION:
-

Perform disconnecting operations of the fuel tube connector (quick type) after observing the precautions.

-

As there is retained pressure in the fuel pipe line, prevent if from splashing inside the engine compartment.

Pressure Specification|Page 2352 > < Pressure Specification|Page 2350