toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Component Inspection|Page 2380 > < Component Inspection
Page 1
background image

Idle Speed/Throttle Actuator - Electronic: Testing and Inspection
On-Vehicle Inspection

ON-VEHICLE INSPECTION

INSPECT IAC VALVE OPERATION

a. Initial conditions:

-

Engine at normal operating temperature

-

Idle speed set correctly

-

Transmission in neutral

-

A/C switch OFF

b. Using SST, connect terminals TE1 and E1 of the DLC1. 

SST 09843-18020

c. After engine speed are kept at 900 - 1,300 rpm for 5 seconds, check that they return to idle speed.

If the rpm operation is not as specified, check the IAC valve, wiring and ECM.

d. Remove the SST from the DLC1. 

SST 09843-18020

Component Inspection|Page 2380 > < Component Inspection