toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Electrode Gap Specification|Page 1831 > < Electrode Gap Specification|Page 1829
Page 2
background image

c. Using a 16 mm plug wrench, remove the spark plugs.

d. Check the spark plug for thread damage and insulator damage.

If abnormal, replace the spark plug.

Recommended spark plug:

e. Check the spark plug electrode gap.

Maximum electrode gap for used spark plug: 1.2 mm (0.047 in.)

If the gap is greater than maximum, replace the spark plug.

Correct electrode gap for new spark plug: 1.0 - 1.1 mm (0.040 - 0.043 in.)

NOTE:  If adjusting the gap of a new spark plug, bend Only the bass of the ground electrode. Do not touch the tip. Never attempt to adjust the gap
on a used plug.

Electrode Gap Specification|Page 1831 > < Electrode Gap Specification|Page 1829