Corolla S Sedan L4-1794cc 1.8L DOHC MFI (2001)
-
There should be no interference between the instrument panel and the front passenger airbag assembly.
CAUTION: For removal and installation of the front passenger airbag assembly, and be sure to follow the correct procedure.
VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED
a. Do a diagnostic system check. (See page DI-240)
b. Do a visual check which includes the following items with the front passenger airbag assembly removed from the vehicle.
-
Check the deformation or cracks on the instrument panel and instrument panel reinforcement.
-
Check the damage on the connector and wire harness.
HINT: If the instrument panel or instrument panel reinforcement is deformed or cracked, never repair it. Always replace it with a new one.
REPLACEMENT REQUIREMENTS
CAUTION: Be sure to follow the correct procedure, for replacement of the front passenger airbag assembly.
SIDE AIRBAG ASSEMBLY
Vehicles not involved in collision:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
a. Do a diagnostic system check.
b. Do a visual check which includes the following item with the seatback assembly installed in the vehicle. Check that there are no cuts or frayed in
seams and outside of seatback cover.
Vehicle involved in a collision and airbag is not deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM