Corolla S Sedan L4-1794cc 1.8L DOHC MFI (2001)
a. Check functioning of SST.
CAUTION: When activate the seat belt pretensioner, always use the specified SST: SRS Airbag Deployment Tool.
SST 09082-00700, 09082-00740
1. Connect the SST to battery.
Connect the red clip of the SST to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.
HINT: Do not connect the yellow connector which will be connected with the seat belt pretensioner.
2. Check functioning of SST.
Press the SST activation switch, and check the LED of the SST activation switch lights up.
CAUTION: If the LED lights up when the activation switch is not being pressed, SST malfunction is probable, so definitely do not use the
SST.
b. Disconnect the pretensioner connector.
1. Remove the front door scuff plate.
2. Remove the center pillar lower garnish.
3. Disconnect the pretensioner connector as shown in the illustration.
c. Install the SST.