Corolla S Sedan L4-1794cc 1.8L DOHC MFI (2001)
-
Never repair a sensor in order to reuse it.
1. LH: REMOVE FRONT AIRBAG SENSOR
a. Remove the LH engine under cover.
b. Disconnect the connector.
c. Remove the 2 bolts and front airbag sensor.
2. RH: REMOVE FRONT AIRBAG SENSOR
a. Remove the RH front turn signal light.
b. Remove the RH headlight.
c. Disconnect the connector.
d. Remove the bolt, 2 nuts and front airbag sensor.
INSTALLATION
1. INSTALL FRONT AIRBAG SENSOR
a. Install the front airbag sensor with the arrow on the sensor facing toward the front of the vehicle.
Torque: 20 N.m (205 kg.cm, 15 ft.lb)