Corolla S Sedan L4-1794cc 1.8L DOHC MFI (2001)
![background image](/toyota/corolla_s_sedan/l4-1794cc_1.8l_dohc_mfi/Page-929004.png)
a. Place the generator washer on the rotor.
b. Using a 29 mm socket wrench and press, slowly press in the rectifier end frame.
c. Install the wire clip and 4 nuts.
Torque:
Nut A 4.5 N.m (46 kg.cm, 40 in.lb)
Nut B 5.4 N.m (55 kg.cm, 48 in.lb)
3. INSTALL PULLEY
a. Install the pulley to the rotor shaft by tightening the pulley nut by hand.
b. Hold SST (A) with a torque wrench, and tighten SST (B) clockwise to the specified torque.
SST 09820-63010
Torque: 39 N.m (400 kg.cm, 29 ft.lb)