Corolla S Sedan L4-1794cc 1.8L DOHC MFI (2001)
9. REMOVE SELF-LOCKING NUT
Using SST, stop the control valve shaft rotating and remove the self-locking nut.
SST 09616-00010
10. REMOVE CONTROL VALVE HOUSING WITH CONTROL VALVE ASSEMBLY
a. Place matchmarks on the control valve housing and rack housing.
b. Remove the 2 bolts and control valve housing with the control valve assembly.
c. Remove the gasket from the control valve housing.
11. REMOVE CONTROL VALVE ASSEMBLY AND OIL SEAL
a. To prevent oil seal lip damage, wind vinyl tape on the serrated part of the control valve shaft.
b. Using a plastic hammer, tap out the control valve assembly with the oil seal from the control valve housing.
NOTICE: Be careful not to damage the oil seal lip.
c. Remove the oil seal from the control valve assembly.
12. REMOVE CYLINDER END STOPPER
a. Using SST, turn the cylinder end stopper clockwise until the wire end is visible through the service hole.
SST 09631-10021
b. Using SST, turn the cylinder end stopper counterclockwise, and remove the wire.
SST 09631-10021
13. REMOVE STEERING RACK WITH BUSHING
a. Using SST, press out the steering rack with the bushing.