Corolla S Sedan L4-1794cc 1.8L DOHC MFI (2001)
a. Using SST, disconnect the brake line. Use a container to catch the brake fluid.
SST 09751-36011
b. Remove the 4 bolts, axle hub and O-ring.
c. Support the parking brake assembly securely.
6. REMOVE REAR AXLE CARRIER
a. Remove the bolt and nut, and disconnect the strut rod from the axle carrier.
NOTICE: Loosen the bolt since the nut cannot be rotated.
b. Remove the nut, bolt and 2 washers, and disconnect the No. 1 and No. 2 lower suspension arm.
c. Remove the 2 nuts, bolts and axle carrier.
INSTALLATION
1. INSTALL REAR AXLE CARRIER
a. Install the axle carrier, 2 bolts and nuts to the shock absorber.
Torque: 142 Nm (1,450 kgf-cm, 105 ft. lbs.)
b. Install the bolt, nut and 2 washers and connect the No. 1 and No. 2 lower suspension arm.
Torque: 125 Nm (1,226 kgf-cm, 89 ft. lbs.)
c. Install the bolt and nut, and connect the strut rod to the axle carrier.
Torque: 91 Nm (930 kgf-cm, 67 ft. lbs.)