Corolla Sedan L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
Control Assembly: Service and Repair
Control Assembly Switches
SWITCHES REMOVAL
1. Remove A/C Switch
Using a screwdriver, pry loose the clips and remove the A/C switch.
REMOVAL HINT: Tape the screwdriver tip before use.
2. Remove Blower Speed Control Switch
a. Remove the illumination light from the A/C control assembly.
b. Using a screwdriver, pry loose the clip and push out the blower speed control switch to rear of the A/C control assembly.
SWITCH INSTALLATION
Installation is is the reverse order of removal