Corolla Sedan L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
![background image](/toyota/corolla_sedan/l4-107.5_1762cc_1.8l_dohc_(7a-fe)/Page-1096002.png)
1. Connect Expansion Valve, Liquid And Suction Tube To Evaporator
Tighten the bolts.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
2. Install Thermistor
3. Install Upper And Lower Case To Evaporator
(a) Install the blower resistor to upper case.
(b) Install the upper and lower case.
(c) Install the 3 clips and the 4 tapping screws.
(d) Install the thermistor connector to upper case.
(e) Connect the A/C harness to thermistor.