Corolla Sedan L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
/Page-690003.png)
a. Apply compressed air into the oil passage to remove the piston.
If the piston does not come out, use needle-nose pliers to remove it.
b. Remove the two O-rings from the piston.
6. IF NECESSARY, REMOVE OIL SEAL RINGS
Remove the three oil seal rings from the shaft.
FORWARD CLUTCH INSPECTION
1. INSPECT CLUTCH PISTON
a. Check that the check ball is free by shaking the piston.
b. Check that the valve does not leak by applying low- pressure compressed air.