Corolla Sedan L4-96.8 1587cc 1.6L DOHC (4A-FE) (1989)
-
Install caliper
-
Set the flexible hose and new gaskets in position and install the union bolt and torque it.
Torque: 30 Nm (22 ft lb)
-
Fill Brake reservoir with brake fluid and bleed brake system
-
Check for leaks
Disassembly and Assembly
DISASSEMBLE CALIPER
-
Remove sliding bushings and dust boots
-
Pull out the main pin boot.
-
Using a screwdriver, remove the cylinder boot set ring and cylinder boot.
-
Put a piece of cloth or an equivalent as shown.