Corolla Sedan L4-96.8 1587cc 1.6L DOHC (4A-FE) (1989)
Install shoe return springs [2WD (w/o A.B.S.) and 4WD]
Using SST #09718-20010, install the front return spring and then install the rear return spring [2WD (w/o A.B.S.)]
Using needle-nose pliers, install the shoe return springs.
INSTALL ROTOR DISC
Before installing, polish the disc and shoe surfaces with sandpaper.
Align the hole on the rear axle shaft flange and service hole on the disc.
Temporarily install the hub nuts.
Remove the hole plug.
Turn the adjuster and expand the shoes until the rotor disc locks.
Return the adjuster eight notches.
Install the hole plug.
INSTALL REAR DISC BRAKE ASSEMBLY