toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

2ND Gear Clutch|Page 1804 > < 2ND Gear Clutch|Page 1802
Page 17
background image

COMPONENTS

INSPECTION OF FIRST AND REVERSE BRAKE COMPONENT

INSPECT DISCS, PLATE AND FLANGE

Check if the sliding surface of the discs, plates and flanges are worn or burnt. If necessary, replace them.

NOTE:

-

If the lining of the disc is exfoliated or discolored, or even a part of the printed number is defaced, replace all discs.

-

Before assembling new discs, soak them in ATF for at least two hours.

Underdrive Clutch and One-Way Clutch No.3 (A240L, A241H)

2ND Gear Clutch|Page 1804 > < 2ND Gear Clutch|Page 1802