Corolla Sedan L4-96.8 1587cc 1.6L DOHC (4A-FE) (1989)
/Page-697007.png)
b. Install the drive pinion to the counter shaft.
5. INSTALL ANOTHER BEARING TO COUNTER SHAFT
Using SST and press, press in the another bearing.
SST 09350 - 32014 (09351 - 32180)
CAUTION: Be sure there is some clearance between the output flange and bearing.
6. INSTALL BEARING INNER RACE
Using SST and press, press in the inner race.
SST 09350 - 32014 (09351 - 32180)
CAUTION: Be sure there is some clearance.
7. ADJUST COUNTER SHAFT STARTING TORQUE
a. Using SST and press, press in the counter driven gear to the counter shaft.