Corolla Sedan L4-96.8 1587cc 1.6L DOHC (4A-FE) (1989)
/Page-719004.png)
a. Position the flange into the ring gear.
b. Using a screwdriver, install the snap ring.
INSPECTION OF REAR PLANETARY GEAR
MEASURE PLANETARY PINION GEAR THRUST CLEARANCE
Using a feeler gauge, measure the planetary pinion gear thrust clearance.
Standard clearance: 0.2 - 0.5 mm (0.008 - 0.020 in.)
Maximum clearance: 0.5 mm (0.020 in.)
If the clearance is greater than the maximum, replace the planetary gear assembly.